Ensure all surfaces are dry, sound and clean; exempt from rust, grease, oil or any other contaminant before painting. Iron oxide must first be coated with Super Galva Primer, Red Oxide Metal Primer¬†or Zinc Chromate Primer; Two Pack Etch Primer¬†is to be used as undercoat for galvanized iron; Mauvilac Wood Primer¬†must be applied to wood. If deemed necessary, Universal Undercoat¬†can be applied as an intermediate coat.
Dilute with Test Benzin¬†as required by relative application method. However, to get best results, avoid excessive dilution. The covering rate is between 9 and 11 m2 per coat. Apply 2-3 coats using a roller, brush or sprayer on a dry and duly prepared surface. The Gloss range requires some 4 hours to be touch-dry and can be coated again after 16 hours.